b'Acurlite Structural Skylights, Inc.10 Installation Manual 11Packaging and Delivery Receiving and Material AcceptanceAcurlite takes extreme care in packaging a project for delivery to minimize the possibility of freightAcurlite typically ships on dedicated carriers or company vehicles to minimize the possibility of freight damage or missed parts.damage or missed parts.When receiving a shipment the customer is expected to check and double check for damage or missing bundles as per the "bill of lading".If you find any discrepancies contact Acurlite as Once the skylight is fully fabricated and assembled in the shop for accuracy the skylight is soon as possible.then knocked down (KD) for shipment. If the project allows, the skylight can ship fully or partially unitized for ease of installation. Receiving Checklist: Skylights will be packaged and loaded in sequential order for ease of installation.All miscellaneous items (small parts and fasteners) and silicone will be boxed and labeled Any visible freight damage or glass breakage (if applicable)? accordingly.Ifso be sure to provide the factory with written and photo documentation within 24 hours All parts, BOM, and erection drawings are labeled and marked.If multiple units exist they will be color coded.Does the Bill Of Lading (BOL) match packaged items? If not be sure to provide the factory with written and photo documentation within 72 hoursAre the erection drawing with the delivery?If not be sure to notify the factory ASAPTypical pre-formed and cut to size closureAre all parts and critical small parts (fasteners, silicone and other miscellaneous boxed items) flashing complete with quantities as stated? Typical rafter assemblyIf not be sure to provide the factory with written and photo documentation within 72 hours(may not apply to all projects)StorageIf materials are for long term storage the above receiving checklist still needs to be reviewed.Typical pre-formed and cut to size sillMaterial stored more that 15 days must be in a cool dry place.Pre-formed cornerpans Material needs to be tarped and out of direct sunlight if stored outdoors. closures Material needs to be properly secured and protected from incidental damage.Long term outdoor storage is not recommended. Typical glass crateTypical KD packaged framing Typical palletized extrusions and misc itemspackaging material not shown for clarity i.e.shrink wrap, foam and bandingwww.acurlite.com570.759.6882'