b"Acurlite Structural Skylights, Inc.18 Installation Manual 19CGF I HEBADJA.Install pressure cap using fastener provided F.Insert backer rod into void Refer to shop erection drawings for type Set backer rod at proper heightB.Apply sealant over screw head and tool G.Fill void with sealant and tool C.Apply sealant over joint and tool H.Install cover cap and apply sealant and toolD.Apply sealant at end of pressure cap and seal I. Apply sealant under peakE.Apply masking tape along edge of glass J. Set peak cap, fill with sealant and tool All surfaces receiving silicone should be properly cleaned and primed per sealant manufacturer's recommendations.DOWSILproducts or equivalent must be used. Please check with sealant manufacturer for compliance.www.acurlite.com570.759.6882"